- Used for placing implant including without guide stent
- Guides implant placement using stainless steel spacers
Technique
- Simply slide the correct stopper over the stainless steel drill
- Place the correct guide pins into the hole(s) after drilling
- The guide pins will save enough space between the osteotomy sites to ensure you drill correctly
Sterilization
- Clean and wash components using an ultrasonic cleaner
- Do not exceed 175° C or 275° F
Components
- (1) 2.0mm Pilot Drill
- Complete set of Guide Pins
- (2) 6.0mm Guide Pins
- (2) 7.5mm Guide Pins
- (2) 9.0mm Guide Pins
- (2) 10.5mm Guide Pins
- (2) 12.0mm Guide Pin
- Complete set of Stoppers
- (1) 6.0mm Stopper
- (1) 7.5mm Stopper
- (1) 9.0mm Stopper
- (1) 10.5mm Stopper
- (1) 12.0mm Stopper
