- Great for Ridge Augmentation
- Designed for the placement of several implants on one operation for the patient who has narrow bone ridge
Technique
- Cut the bone that implant will be placed using saw disk
- Insert the spreading pins between cut bones side by side
- Connect spreading adapter with inserted spreading pins and turn
- Spreading pins can be turned either with spreading adapter or wrench adapter
- Turn 3pins one by one slowly and expand the ridge evenly
- After completing expansion, remove spreading pins and place the fixture
- *Note: When the expansion is completed, place the fixtures as one to one exchange of pins and fixtures spreading pins and fixtures, not removing all spreading pins at one time
- Perform bone grafting between and around placed fixtures
Sterilization
- Clean and wash components using an ultrasonic cleaner
- Do not exceed 175° C or 275° F
Components
- (1) 4x4mm Square Ratchet Wrench
(1) 7.0mm Saw
(1) 8.0mm Saw
(3) Spreading Pins
(3) Spreading Adapters
(1) Spreading Pin Driver
